Hydro Jetting Pros24/7 emergency service (833) 349-033324/7
(833) 349-0333Call now · 24/7 emergency service

Hydro jetting in Industry, Texas

High-pressure drain and sewer line cleaning in Industry, Austin County. Camera inspection before and after, pressure matched to your pipe, and a straight answer about what we found.

78944Primary ZIP for Industry
AustinCounty
41.2 mi west of Katy
Sewer cleaning truck parked on a city street while a technician in full protective gear jets water into an open manhole

Why drain lines fail in Industry

If you are in Industry and the drains slow every time it rains hard, that is worth knowing about. Around Houston the combination of a high water table and storm-driven groundwater pushes silt and debris into any line with open joints.

We jet the line out and camera it, which separates the two possibilities: a pipe that is simply dirty, and a pipe that is taking on groundwater because a joint has failed. Those need completely different responses.

Our Industry coverage takes in the whole town and the Austin County area around it. If you are not sure whether your address qualifies, call and ask — it takes a moment to check.

What we clean in Industry

Seven services covering residential mains, branch drains, commercial buildings, kitchens and site storm drainage — all available across Industry.

Sewer Line Cleaning in Industry

Clears the main line that carries waste from your building to the municipal sewer or septic tank.

Service details

Drain Line Cleaning in Industry

Clears the branch lines running from individual sinks, tubs, showers and floor drains into the main.

Service details

Main Sewer Line Clog Removal in Industry

Emergency clearing when the main line is fully blocked and waste is backing up into the building.

Service details

Commercial Drain Cleaning in Industry

Scheduled and emergency drain service for buildings where a backup means closing the doors.

Service details

Grease Line Cleaning in Industry

Removes hardened fat, oil and grease from kitchen waste lines and interceptor runs.

Service details

Restaurant Drain Cleaning in Industry

Drain service built around a working kitchen — floor sinks, dish pit, prep lines and interceptor.

Service details

Storm Drain Cleaning in Industry

Clears catch basins, area drains and storm lines so sites drain before the water reaches the building.

Service details

Working around Industry

Places near our Industry jobs. Distances are from the centre of city.

Harmonie Park park · 7.24 mi (just outside town)
Soil Conservation Service Site 30 Reservoir reservoir · 9.07 mi (just outside town)
Roesler House building · 3.61 mi (just outside town)
Wesley Brethren Church church · 6.79 mi (just outside town)
Star Hill Cemetery cemetery · 3.13 mi (just outside town)

Signs your line needs cleaning

These point at the line rather than the fixture. A single slow sink is usually a trap; several at once is the main.

  • More than one fixture backing up at the same time
  • Gurgling from a toilet or tub when the washing machine drains
  • Sewage appearing at the lowest drain in the building
  • A drain that was cleared recently and is already slowing
  • Sewer smell near a cleanout, basement or floor drain
  • Standing water at a floor sink or dish pit
  • Toilets that need a second flush to clear
  • Ponding in a yard or car park long after the rain stops

How a Industry job runs

How a job actually runs in Industry, from the phone call to the footage.

  1. You call and we diagnose over the phone

    What is backing up, how many fixtures, and whether there is an accessible cleanout. That tells us what to bring and tells you what to do meanwhile.

  2. We inspect before cleaning

    A camera pass establishes whether it is roots, grease, scale, a belly holding water or a structural failure. Only some of those are fixed by cleaning.

  3. Pressure matched to your pipe

    Clay, PVC, cast iron and Orangeburg all need different handling. Old, thin or heavily scaled pipe gets pressure dialled back deliberately.

  4. Jet the full run and flush it out

    We work the nozzle through the whole length rather than stopping at the blockage, and flush the loosened material out of the system.

  5. Re-camera and show you

    The second pass is the only honest proof the line is clear. If it shows something cleaning will not fix, you get that straight along with the footage.

Why Industry customers call us

We inspect the line before cleaning it rather than afterwards. That is the difference between knowing what you are dealing with and guessing, and it is why we can tell you when jetting is the wrong answer.

We do not quote a price before seeing the line. What the job costs depends on the length and diameter of the run, whether there is an accessible cleanout and what is actually in the pipe. A number given over the phone before any of that is known is a guess.

We jet the full run rather than stopping at the blockage. Clearing just past the obstruction is what produces a repeat call a few weeks later, because everything that caused it is still lining the pipe.

No upselling off the back of a callout. If the line needs cleaning we clean it, and if the inspection shows the pipe is fine we say that too.

Nearby areas we cover

Nearby towns and cities we also work in. Austin County and the areas around it are all covered on the same number.

Elsewhere in Austin County

See every Texas city we cover, or read more about hydro jetting across Texas.

Industry questions

Do I need to be there while you work?

Someone needs to provide access and should be reachable, because if the inspection turns up something that changes the job we will want to talk to you before carrying on rather than after.

Do you handle commercial kitchens in Industry?

Yes. Kitchen grease lines and interceptor runs are a large part of the work, and it is scheduled around service so the kitchen is ready for the next shift. You get documentation of the work for your records.

Is hydro jetting safe for older pipes?

It is when the pressure is matched to the pipe. Thin, heavily scaled cast iron, old Orangeburg and already-cracked clay need a conservative approach or a different method entirely. That is precisely why we camera the line before jetting rather than after.

Do you serve the area around Katy as well?

Yes. Katy is about 41.2 miles west of Industry and we cover both, along with the towns in between.

Can you tell what is wrong without digging?

In most cases, yes. A camera inspection through an accessible cleanout shows roots, grease, scale, a belly holding water or a break, and gives the distance from the access point. That is usually enough to decide what to do next.

Blocked drain in Industry?

Not sure whether this is urgent? Describe it on the phone — that is usually enough for us to tell you.

(833) 349-033324/7 emergency service in Industry

Or send the details through our contact form.